|
|
 |
 |
Advent Commercial Fire
Advent Fire delivers advanced
hardwire/wireless fire protection for
both new
and existing commercial fire alarm
installations. Advent Fire is easy to
install and simple to use. |
Advent Fire is suited for large
applications or where future expansion
may be required.
Part no: 60-562-03 (250 Zones, 8 Partitions)
Part no: 60-562-06 (132 Zones, 4 Partitions)
Advent Fire delivers advanced hardwire/wireless fire protection for both new and existing commercial fire alarm installations. Advent Fire is easy to install and simple to use.
The system is available in two models:
- 60-562-03 has 250 zones, 8 partitions, and up to 250 users
- 60-562-06 has 132 zones, 4 partitions, and up to 100 users
Advent Fire is suited for large applications or where future expansion may be required.
Standard Features
- Six general purpose inputs/outputs, one 12 VDC 2-wire smoke loop, one general purpose input only zone
- Supports up to 132 or 250 supervised, fire-rated hardwire zones (depending on model)
- Supports a maximum of 132 wireless zones (both models)
- 78 pre-defined zone configuration types
- 4 or 8 partitions (based on model)—two account numbers per partition; 32 shared schedules per partition
- 100 or 250 user-programmable access codes (based on model); 4.6 digit lengths allowed
- 800 word vocabulary for voice and display
- 12 VDC, 5 amp auxiliary power output
- On- and off-site telephone access with digitized-voice feedback
- Dual SuperBus Ports—support up to 62 bus devices (31 per port)
- 2,048 event buffer with time and date stamp
- Contact ID™ reporting format
- Up to 16 alphanumeric pagers or cellular phones with paging capability
- Long Range Radio (LORRA); pre-programmed, on-board header
- Network buddy system
- Programming can be downloaded using ITI Advent Downloader
- Flash memory, downloadable upgrades
Specifications
| Power Supply: |
| Required Transformer |
Class I Single Internal 24 VAC, 100 VA |
| Backup Battery |
12 VDC, 17.2 - 18.0 Ah rechargeable, sealed, lead-acid (up to 3—additional enclosure required for third battery) |
| Battery Backup Time |
Minimum 24 hours (based on load and number of backup batteries installed) |
| Battery Test |
Every 4 hours (default) or 24 hours |
| Fuse |
12 VDC, 5-amp built-in current limiting circuitry: SuperBus outputs limited to 650 mA each, long-range radio output limited to 250 mA |
| Telephone/Modem: |
| Dialing |
DTMF or pulse |
| Modem |
Up to 14,400 bps, Bell 103, Bell 212A, V.32bis, V.32, V.22bis, V.22, V.23, V.21, V.42bis |
| Telephone Interface |
Line seizure relay, DTMF phone control, line supervision |
| Color: |
Fire Red |
| Dimensions: |
21.5" wide, 14.75" high, 5.0" deep |
Approvals
- FCC Parts 15 and 68
- UL 365: Police Station Connected Burglar Alarm Units and Systems
- UL 609: Local Burglar Alarm Units and System
- UL 864: Control Units for Fire Protective Signaling Systems
- Local Non-Coded Fire Alarm Systems
- Auxiliary Fire Alarm Systems
- Central Station Fire Alarm Systems—DACT
- Remote Station Fire Alarm Systems—DACT
- Protected Premise Fire Alarm Systems—DACT
- Type of Service: Automatic Fire Alarm, Manual Fire Alarm, Waterflow Alarm
- UL 985: Household Fire Warning System Units
- UL 1023: Household Burglar Alarm System Units
- UL 1610: Central-Station Burglar Alarm System Units
- UL 1635: Digital Alarm Communicator Systems
- UL 1637: Home Health Care Signaling Equipment
- CSFM California State Fire Marshall
- Complies with NFPA 72 Fire Alarm Code
| Part Number |
60-562-03 (250 Zones)
60-562-06 (132 Zones) |
| Sensor Zones |
up to 250 |
|
|
|
